CC1101 Wireless RF Transceiver Радиотрансивер 315-915MHZ Raspberry pi Arduino + 8pcs female to female pin wire

315/433/868/915 мГц + SMA Беспроводной модуль 1,8-3,6 В
CC1101 Wireless RF Transceiver 315/433/868/915MHZ + SMA Antenna Wireless Module 1.8-3.6V
Working voltage:1.8-3.6V.
Operating frequency: (Module:387-464MHZ) Default working frequency: 433Mhz.
Instantaneous maximum working current: 30mA.
Maximum transmit power: 10 (+ 10dBm)
Support 2-FSK, GFSK and MSK modulation.
Receiver sensitivity -110dBm at 1200 baud.
Minimum operating speed 1.2kbps, the highest 500kbps.
Separate 64-byte RX and TX data FIFO buffer.
Support RSSI signal strength detection and carrier sense function.
Low power consumption.
Mailing Address (256) Operating frequency can be programmed via SPI.
Programmable output power, for all the support frequencies up to + 10 dBm.
WOR feature can be set to standby, the proportion receiving state timer switch time to reduce power consumption.
Fast frequency synthesizer with proper frequency hopping system.

GIFT
8 pcs female to female pin wire