
Pro Micro 5v Mega32U4-AU 16MHz Original Chipset Mega32U4 Atmel Arduino (Cod: AB0197)
7,000 ֏
Pro Micro
ATMEGA32U4 in 5 v 16 MHZ (Original Chipset Anti Static Package)
Under the support of the Arduino IDE V1.0.1
The board of directors on the micro USB interface programming
Four 10 bit ADC pin
12 digital I/O (PWM)
Rx and Tx hardware serial connection
Description:
Arduino Pro Micro
This small board to do all in the neighbourhood of the Arduino skills:
4 channel 10 bit ADC, five PWM pin, 12 DIO and hardware serial connection Rx and Tx:
Are you familiar with. Run in 16 MHZ and 5 v, the committee will remind you of many
other you like the Arduino compatible circuit board, but this little guy can go to any place.
In the ship has a voltage regulator, so it can accept voltage up to 12 VDC. If you are the
supply of unstable power supply board, must be connected to the "RAW" is not the VCC pin.
This latest version correct silk, make the pin 14 is correct. We also added a PTC
fuse and diode protection power supply circuit and correct RX and TX LED circuit
կատարելու դեպքում: (Անիմաստ ` Աննպատակ զանգեր չկատարել)
նախքան զանգահարելը ֆիքսել տվյալ ապրանքատեսակի կոդը,
որը գտնվում է անվանման վերջում։ (Cod: AB?)
Գործում է առաքում Երևան քաղաքում և մարզերում։
Հասցեական առաքում մարզեր՝ Հայ փոստի միջոցով
Առաքման պայմաններին ծանոթանալու համար զանգահարել նշված հեռախոսահամարներով.
Действует доставка в Ереване и областях.
Для ознакомления с условиями доставки звонить по указанным номерам.
We have delivery both in Yerevan and in regions. For detailed information
About the delivery please contact us by phone call.
0197 - 006
ATMEGA32U4 in 5 v 16 MHZ (Original Chipset Anti Static Package)
Under the support of the Arduino IDE V1.0.1
The board of directors on the micro USB interface programming
Four 10 bit ADC pin
12 digital I/O (PWM)
Rx and Tx hardware serial connection
Description:
Arduino Pro Micro
This small board to do all in the neighbourhood of the Arduino skills:
4 channel 10 bit ADC, five PWM pin, 12 DIO and hardware serial connection Rx and Tx:
Are you familiar with. Run in 16 MHZ and 5 v, the committee will remind you of many
other you like the Arduino compatible circuit board, but this little guy can go to any place.
In the ship has a voltage regulator, so it can accept voltage up to 12 VDC. If you are the
supply of unstable power supply board, must be connected to the "RAW" is not the VCC pin.
This latest version correct silk, make the pin 14 is correct. We also added a PTC
fuse and diode protection power supply circuit and correct RX and TX LED circuit
- -
կատարելու դեպքում: (Անիմաստ ` Աննպատակ զանգեր չկատարել)
նախքան զանգահարելը ֆիքսել տվյալ ապրանքատեսակի կոդը,
որը գտնվում է անվանման վերջում։ (Cod: AB?)
Գործում է առաքում Երևան քաղաքում և մարզերում։
Հասցեական առաքում մարզեր՝ Հայ փոստի միջոցով
Առաքման պայմաններին ծանոթանալու համար զանգահարել նշված հեռախոսահամարներով.
Действует доставка в Ереване и областях.
Для ознакомления с условиями доставки звонить по указанным номерам.
We have delivery both in Yerevan and in regions. For detailed information
About the delivery please contact us by phone call.
- -
0197 - 006