USB ASP USB ISP AVR programmer + development board Программатор Arduino (Cod: AB0383)
(A) 3000AMD
(B) 7500AMD
-
ISP ATMEGA16 ATmega32 Minimum board
Product Features:
32 I / O pin all wires.
Classic minimum ATmega16 system, eliminating the hassle of soldering.
Crystal: The socket welding hole makes it easy for the buyer to replace the crystal, 8m crystal.
Support for chips: ATmega16 / ATmega32 and chips that are compatible with the pin code.
Power supply: Power adapter or external power expansion pin (does not support ISP download interface)
DC-005 Power block (support transposons - 5.5 * 2.1mm)
Extend 4 channels VCC, GND outside.
Reset: Reset and power reset button.
Power LED (D1) and program start indicator (D2)
Standard ISP download interface.
Note: This is a minimum development motherboard without AVR chip, you need to purchase the chip additionally!
This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. It is not only quite compact but also very elegant in design. The USB interface is achieved by using an atmega processor and the rest is done in the firmware
With 500mA over-current protection, self-healing fuse and full protection for expensive computer motherboard
Designed for laptop computers, special two 3.6V regulator, the appearance is excellent to the level, get rid of hidden hardware instability! Jumper settings in power mode for the target board.
-
Հարգելի հաճախորդներ, զանգահարել միայն հստակ գնումներ
կատարելու դեպքում: (Անիմաստ ` Աննպատակ զանգեր չկատարել)
Գործում է առաքում Երևան քաղաքում և մարզերում։
Առաքման պայմաններին ծանոթանալու համար զանգահարել նշված հեռախոսահամարներով.
Действует доставка в Ереване и областях.
Для ознакомления с условиями доставки звонить по указанным номерам.
We have delivery both in Yerevan and in regions. For detailed information
About the delivery please contact us by phone call.
(A) 0383 - 080
(B) 0384 - 080
(B) 7500AMD
-
ISP ATMEGA16 ATmega32 Minimum board
Product Features:
32 I / O pin all wires.
Classic minimum ATmega16 system, eliminating the hassle of soldering.
Crystal: The socket welding hole makes it easy for the buyer to replace the crystal, 8m crystal.
Support for chips: ATmega16 / ATmega32 and chips that are compatible with the pin code.
Power supply: Power adapter or external power expansion pin (does not support ISP download interface)
DC-005 Power block (support transposons - 5.5 * 2.1mm)
Extend 4 channels VCC, GND outside.
Reset: Reset and power reset button.
Power LED (D1) and program start indicator (D2)
Standard ISP download interface.
Note: This is a minimum development motherboard without AVR chip, you need to purchase the chip additionally!
This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. It is not only quite compact but also very elegant in design. The USB interface is achieved by using an atmega processor and the rest is done in the firmware
With 500mA over-current protection, self-healing fuse and full protection for expensive computer motherboard
Designed for laptop computers, special two 3.6V regulator, the appearance is excellent to the level, get rid of hidden hardware instability! Jumper settings in power mode for the target board.
-
Հարգելի հաճախորդներ, զանգահարել միայն հստակ գնումներ
կատարելու դեպքում: (Անիմաստ ` Աննպատակ զանգեր չկատարել)
Գործում է առաքում Երևան քաղաքում և մարզերում։
Առաքման պայմաններին ծանոթանալու համար զանգահարել նշված հեռախոսահամարներով.
Действует доставка в Ереване и областях.
Для ознакомления с условиями доставки звонить по указанным номерам.
We have delivery both in Yerevan and in regions. For detailed information
About the delivery please contact us by phone call.
- -
(A) 0383 - 080
(B) 0384 - 080