Bigtreetech Octopus Pro v1.0 for 3d printer
27,000 ֏ 27,000 ֏
$70 6,398 ₽
【Main Control Chip】The main control board uses 32-bit ARM-level Cortex-M4 series STM32H723ZE/ STM32F429ZE / STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB.
【Support 60V Input】Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply)
【6 Controllable Fans】Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options.
【Update Firmware: Klipper/Marlin/RRF】Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however, this method is not recommended for novice users as discussed later in this document.
【Level conversion IC】Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch.
【Support 60V Input】Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply)
【6 Controllable Fans】Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options.
【Update Firmware: Klipper/Marlin/RRF】Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however, this method is not recommended for novice users as discussed later in this document.
【Level conversion IC】Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch.
Նմանատիպ հայտարարություններ![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Baofeng UV-9R Plus/Pro ռացիայի մարտկոց Type-C բնիկով
7,200 ֏
Shield For Arduino Nano Atmega328 Плата расширения для Ардуино (Cod: AB0242)
3,000 ֏
Arduino Pro Mini Ардуино Про Мини uni nano mega leonardo
3,000 ֏
Hikvision DS-PWA64-L-WE AX-PRO անլար ահազանգման համակարգ, սիգնալիզացիա Wireless
70,000 ֏
Շտապ!
Arduino Pro Mini Atmega328 3.3v 8Mhz Original Chipset Atmega328p (Cod: AB0625)
5,000 ֏
Arduino Armenia shop Module For Arduino Module Модули Для Ардуино Arduino
Ունիվերսալ լիցք. Liitokala, Lii-S8 LCD Smart 8 Port Charger for 3.7V / 1.2V / 9V AA / AAA 18650, 26650 Battery
18,500 ֏
3.5 inch 480x320 TFT LCD Touch Screen Display Module For Arduino (Cod: AB2125)
10,000 ֏
CNC Shield For Arduino + 4 x A4988 - step motor Shield For UNO, v3 Driver Arduino (Cod: AB2050)
6,000 ֏
OXBAR Magic Maze Pro 10K
12,000 ֏
Vape pozz pro smoke
15,000 ֏
Arduino Nano Pro Mini ATMEGA328 3.3v Controller Board Module (Cod: AB0226)
5,000 ֏
Airpods Pro 2 Լիովին նոր Ապառիկ վաճառք
90,000 ֏
SMOK POZZ PRO
13,000 ֏
IGNITE 1500 Puff Ակցիա / ծուխ V15 for USA Product / Առաքում ԿԱ
4,000 ֏
Vape puff PYRO 6000 (For USA) Առաքում ԿԱ
4,500 ֏
Xiaomi, 12 pro
230,000 ֏
Vape / pod Smok Nfix Pro (Original) Երաշխիքով + Առաքում ՀՀ ողջ տարածքում
14,000 ֏
Cartridge for SMOK Novo 2x/Novo 2s
2,000 ֏
ELM327 V1.5 PIC18F25K80
7,000 ֏