GENELEC Studio Monitor TRIAMP Active. KING of Studio. Limited. Fully restored. Made in Finland

Legendary Genelec Triamp is recommended fore enjoying its Excellent SOUND.

System Specifications;
Lower cut-off frequency, -3 dB: (27 Hz)
Upper cut-off frequency, -3 dB: (23 kHz)
Free field frequency response tolerance of system 3 dB
Maximum continuous sine wave acoustic output @ 1m on axis in half space) 116 dB
Maximum continuous RMS acoustic output in same conditions with IEC-weighted noise:) 116 dB
Maximum peak acoustic output per pair at engineers’ site, speakers @ 2 m from the engineer, with
music material) 122 dB
A -20 dBu signal input will produce 97 dB SPL in free field @1 m on axis with all controls set at the ‘CAL’ position.
The CAL position is the 0 dB position of all tone controls and the maximum sensitivity position of the input level control.
See specification in the Crossover Section
Self generated noise level in free field @ 1m on axis (15 dB (A weighted)
Harmonic distortion at 100 dB SPL @ 1m on axis
f (200 Hz (3 %
f) 200 Hz (1 %
Dimensions:
Height:19 1/2″ (495 mm) /Width 35 1/2″ (900 mm) / Depth 18 1/4″ (464 mm)
Amplifier
Bass amplifier output power at 4 ohm load:
Continuous: 350 W / Momentary 490 W
Midrange amplifier output power at 8 ohm load:
Continuous 125 W / Momentary 250 W
Tweeter amplifier out power at 16 ohm load;
Continuous 100 W / Momentary 200 W
Key features:
Basic tool for music monitoring
Three integrated power amplifiers
Reliable
3 dB from 20 Hz to 20 kHz
1 W acoustic power output
115 dB SPL per pair in a normally damped 70 m3 control room
Symmetric input, + 9 dBm
Compact size, 200 liters
The GENELEC TRIAMP was in production between 1979 and 1981 model.
Weight 150 lb (68 kg)

Made in Finland
Limited Edition
Vintaje
Studio
Mastering
Hires
Hi-End
Audiophile
HD
Hires
Prestige
Collection