UPS2000 UPS 2000 VA UPS Mercury Elite PRO 2000VA ups2000va

UPS 2000VA UPS Mercury Elite PRO 2000

Specification:
Rating Input Voltage 2000 VA / 1200 W
Rating Input Frequency 60/50Hz (Auto Sensing)
Input Phase Single Phase
Input Socket with FUSE
Cold Start (0~100% load) Press the ON / OFF Switch
Input Range (220V) 140-300
Alarm Battery Mode Sounding every 10 seconds
Alarm Low Battery Sounding every second
Alarm Overload Sounding every 0.5 second
Alarm Fault Continuously sounding
Rating Output (VA) 2000
Rating Output (W) 1200
Waveform Battery Mode (Simulated Sine Wave)
AC Mode (Sine Wave)
Power Factor 0.6
Rating Output Voltage 220V
AC Voltage Regulation 10% (Battery Mode)
Noise Level Less than 45dB
Rear Output Socket 4x Universal - Battery Backup
Transfer Time Typical 2-6ms, 10ms max
Humidity 0-90% RH @ 0-40°C
(Non-condensing)
Overload Protection: Line Mode 110% 5%; (go to fault mode after 5 minutes)
120% 5%; (go to fault mode immediately)
Battery Mode 110% 5%; (shut down after 5 seconds)
120% 5%; (shut down immediately
Protection:
Full Protection Overload, Discharge & Overcharge Protection
Battery & Runtime: Rating 2 X 12V/9AH
Recharge Time 6-8 Hours Recover To 90% Capacity
Change Current About 1A at Normal Mode
Short Circuit Protection: Line Mode Fuse & Firmware Protection
Battery Mode Firmware Protection
Output Frequency: Rating Frequency 60Hz or 50Hz 1Hz
Line Mode Synchronize with the Utility
Indicators: AC Mode Green Lighting
Battery Mode Yellow Flashing
Fault Red Lighting
Management: Communication Interface USB/RJ11
Physical: Dimension (DxWxH) 390 x 125 x 225
Net Weight (kg) 12.7