Gpg S-Boot Cable

GPG S-Boot Cable was specially designed to repair dead boot in Samsung I9300, I9500, N7100 mobile phones. This cable works standalone and doesn't require credits, boxes or dongles.

GPG S-Boot Cable - Supported Models and Features
Repair Samsung I9300 Dead Boot
Repair Samsung I9500 Dead Boot
Repair Samsung N7100 Dead Boot
GPG S-Boot Cable - Repair Dead Boot Procedures
Repair Dead Boot Procedure for Samsung I9300
Insert SD card (I9500/I9300/N7100)
Turn off the phone (but do not turn off the power supply or leave a battery in)
Insert download clip
Wait 2-5 minutes (do not pull out the power supply)
After this process the phone automatically turns to DWL mode
Repair Dead Boot Procedure for Samsung N7100
Take off the phone screen (if not removed, the screen may get burned)
Take off Single PCB with regulated power supply
Insert SD card (I9500/I9300/N7100)
Insert download clip
Wait 5 minutes
Turn on download clip and run flashing platform
If the driver is recognized, load the file and flash the phone
After the end of the procedure put the screen back
Repair Dead Boot Procedure for Samsung I9500
Take off the phone screen (if not removed, the screen may get burned)
Take off Single PCB with regulated power supply
Insert SD card (I9500/I9300/N7100)
Insert download clip
Wait 5 minutes
Turn on download clip and run flashing platform
If the driver is recognized, load the file and flash the phone
After the end of the procedure put the screen back
Please Note: If the phone system hangs after DWL Mode, it may be the issue with Flash IC or other hardware.